Email: Address: Shuangxi West Road, Luoxin Industrial Zone, Xin'an County, Luoyang City

What should I do if the induction coil of the medium frequency electric furnace is completely clogged?

📅 2018-01-25 15:53:10 ✍️ Author:admin 👁️ 964 views
Ready
1.6x

A filter screen must be installed for the cooling water source of the medium frequency electric furnace before the water enters the furnace. Some users directly pump river water as the cooling water for the medium frequency furnace, which makes impurities in the river water very easy to clog the induction coil. Even if no impurities enter, scale will form inside the copper pipe of the induction coil after a long time, which reduces the cooling water flow of the induction coil, resulting in poor water flow in the induction coil and affecting the overall performance of the medium frequency furnace. After the induction coil is fully blocked, if the blocked position can be roughly located, an iron wire can be inserted into the copper pipe of the induction coil. First feed the wire from both ends to find the shortest path, and see if the impurities inside can be hooked out. If the induction coil is blocked by oxides such as scale, the problem can be solved by injecting dilute sulfuric acid, if the blockage is caused by other infusible impurities that cannot be hooked out.

You only need to dismantle the bakelite columns of the induction coil, heat the induction coil by burning, and heat the copper pipe of the induction coil to a certain temperature (it is fine as long as you do not burn it red), then burn out the internal impurities. If you roughly know the blocked position, you can also use oxygen for local heating. Try not to cause excessive deformation of the coil during heating, otherwise it will be troublesome to reinstall. The above methods have sound effects, cause no damage to the induction coil, and have no impact on its subsequent use.

However, it should be noted that the surface insulation will inevitably be damaged after the coil surface is treated by burning or other methods. You should timely use TSC-L ultra-high temperature insulating paint or APC-H+ high temperature arc-resistant insulating enamel for insulation repair, so as to ensure that no sparking or arcing occurs after the coil is reinstalled.

Previous:中频电炉炉衬的寿命如何判断?Next:中频炉除尘器的特点及工作原理
WhatsApp
WeChat