Induction heating technology is currently the most commonly used and most effective heat treatment process, which is widely used in surface quenching, through heating quenching, tempering, low-temperature stress relieving, high-temperature annealing and normalizing, weld annealing, powder metal sintering and other fields. In the casting industry, the duplex melting process is developing rapidly, that is, using medium frequency furnaces for heat preservation and property modification to carry out precision casting of nodular cast iron or alloy steel. In forging, rapid through heating hot forging realized by induction heating not only reduces scale loss but also greatly extends the service life of forging dies, with a material utilization rate of up to 85%, and the surface roughness of forgings can be less than 50μm. In terms of welding and quenching, foreign countries are committed to developing high-power all-solid-state high-frequency power supplies on the one hand, and developing highly automated complete heat treatment systems on the other. At present, China needs about 10 million tons of castings per year, while the casting industry is still dominated by cupola melting and ordinary cast iron casting with small tonnage, which leads to large fluctuations in temperature and composition and high rejection rate. The rejection rate of well-performed casting enterprises is still between 6% and 15%, while that of ordinary foundries can be as high as 30%.
Before operation, you should first familiarize yourself with the heat treatment procedure and the equipment to be used.
During operation, you must wear necessary protective equipment properly, such as work clothes, gloves, protective glasses, etc.
No items that hinder operation shall be placed between the induction heating equipment and the cooling equipment.
Operations such as mixing carburizing agent and sandblasting shall be carried out in a separate room, and sufficient ventilation equipment shall be equipped.
Hazardous areas of the equipment (such as power leads, busbars, conductive rods and transmission mechanisms of electric furnaces, etc.) shall be protected with wire mesh, fences, plates and other materials.
All tools for heat treatment shall be placed orderly, and cracked or inappropriate tools shall not be used.
The entrances and exits and internal passages of the workshop shall be kept unobstructed. Fire extinguishing sand boxes shall be placed near the nozzles of heavy oil furnaces and burners of gas furnaces; fire extinguishers shall be provided in the workshop.
Do not touch heat-treated workpieces with your hands to avoid scalds.